Silk Reeling Peripheral Machines

Silk reeling Peripheral machines

Hangzhou Textile Machinery Co,. Ltd. While in the process of leading the enterprise to achieve modernization in silk reeling field, they not only to develop new generation automatic reeling machine, but also to put a good deal of special study to develop silk reeling peripheral machines.
The products already succeed to market is: FEIYU201V Cocoon-Cooking Machine ,FEIYU118 Re-reeling Machine , Cocoon peeling Machine etc. In the year 2003, pass the check of national cocoon and silk venture capital project " Silk Reeling complete line all-in-one development project".
Hangzhou Textile Machinery Co,. Ltd. Can apply the complete line for Silk Reeling and give the after service both here and abroad.

Main Features:

It adopts computer process control technology.
Apply touch panel of man machine conversation
Set the technical parameter of cocoon-cooking freely.
Use configuring monitor on cocoon-adding position and applying automatic control temperature of electromagnetic valve.
In technology, use expanding and permeating technics together, using the differential water pressure between compressor and V-slot to permeate.
V-shaped construction is used at the adjustment position to fully increase temperature difference, make the cooked cocoons to cool rapidly, either to protect the outer layer, or to cook fully the inner layer.

Main parameter：

Type: in recycle mode, with upper and lower layers, the tanks are made of stainless-steel.
Driving form: driven by chains and worm gear, front and rear gears are in initiative driving.
No. of cocoon cages: 136 cages.
Cocoon supplying capacity: for 4-6 sets of automatic silk reeling machines.
Cocoon feeding mode: automatic
Cooking time: 15-21 min
Motor: 2.65 Kw
Overall dimension (L*H*W): 16200*1400*2600 mm

Various targets:

Capacity target: the ratio of non-broken cocoon filament increased obviously, and rushing upon ten thousand meters reduced 1-2 times, so to increase the unit capacity, decrease the machine operators and cut down the cost.
Reeling discount target: compared with the cocoons from the same place at the same time, the ascending ratio of reeling discount reduced above 0.01, calculated according to the proportioning: one cocoon machine for 6 sets automatic silk reeling machine, every V-type cocoon cooking machine can save materials 4.5 tons.
Quality target: for the inherence quality target, by comparative analysis, raw silk neatness can increase 0.3-0.5, and the raw silk thickness variation can be reduced by 0.5 strips, raw silk has good Flexibility, fine transparence and hank has good softness.
The machine has automatic cocoon supplying device and automatic temperature control system, so to raise labor productivity. The following technical process can be cancelled: vacuum direct steaming / vacuum permeating / even the cocoons, so to decrease the machine operators obviously, for normal cocoon cooking machine, the operators are 3 persons, but for V-type, the operator only need one, the operator decrease 2/3 and the working efficiency increase 2/3 accordingly.

Main features:

The door of the compartment uses transparent arc hood, bright and clear.
Main transmission adopts FC stepless speed variation of motor.
Gears and friction wheels on the both side of the machine drive the grand reel.
It has functions of electronic purgeur, fixed length and broken-end detection.
It has functions of automatic temperature control, display of temperature and rotational speed.
It has humidity carrying on and out device, with excellent heat insulation system.

Main device:

The grand reel is composed of aluminum frame, reel center pipe manufactured from seamless steel tube, and hardwood angle.
Traverse device: Driven by the first class bevel gear, eccentric disc and lever rod.
Reel stop device: It has friction wheel clutch and bake device with back-proof.
It has functions of automatic temperature control, display of temperature and rotational speed.
It has humidity carrying on and out device, with excellent heat insulation system.

Main parameter:

Layout: 40 units/set
Specification: bilateral reel, the gauge of ends is 110mm, 5 ends per unit, the body length is 865mm.
No. of operators (40 units): 1 person
Design capacity per unit (21D): 147-273g/unit.hr
Reel width: 70-90mm
Motor power: 1.5 Kw
Overall dimension (L*W*H): 19000*2000*1550 mm

Welcome You To Hangzhou Textile Machinery Co.,Ltd